Control Valve

Speciality Valve, a leading Control Valve Manufacturers in India, stands out for its dedication to producing high-quality valves customized to fulfill a variety of industrial demands. Our reach extends across India, serving prominent industrial hubs such as Mumbai, Delhi, Chennai, Kolkata, Ahmedabad, and Bangalore, among others.

About Control valve:
A control valve is a power-operated valves which is used to regulate or maintain the flow of fluids, such as gas, oil, water, and steam. Unlike basic on/off valves, these valves enable precise adjustment of flow rates to maintain desired process variables, such as temperature, pressure, level, or flow rate, at specified set points. These valves work by modulating the flow of fluid through the valve in response to signals from a controller, which continuously compares the actual process variable with the desired set point.

Working Operation:
Most of the valves with works with an actuator whether electronic or pnuematic. This is how the control valve works the working begins with a sensor that continuously monitors the process variable set point, which could be temperature, pressure, flow rate, or another relevant parameter. The sensor detects any deviations from the desired set point. The sensor sends the measured process variable data to a transmitter, which converts it into a standardized signal. The transmitter then sends this signal to a controller. The controller then compares the actual process variable with the desired set point and calculates the required adjustment. Based on the comparison the it set signals. The control signal is transmitted to the final control element, which is the control valve in this case. The control valve manipulates the flow of fluid in the pipeline according to the received control signal. By adjusting the position of the valve’s closure element (such as a plug, ball, or disc). The process variable is continuously monitored, and any changes are fed back to the controller. The controller adjusts the control signal as needed to maintain stable and accurate control over the process variable.

Applications of control valve:
1.Oil and Gas Industry
2.Chemical Processing Industry
3.Power Generation Industry
4.Water and Wastewater Treatment Plants
5.Petrochemical Industry
6.Pulp and Paper Industry
7.Mining and Metals Industry
8.Refining Industry
9.Water Distribution Plants

Advantages:
1.Provides precise flow control
2.Optimizes system performance
3.Quick respond
4.Flexibility
5.Remote control
6.These valves are precise and accurate

Types:
1.Three-way control valve
2.Cage type control valve
3.Double seat control valve
4.Type shutoff control valve
5.Single Seat control valve
6.Water Control valve
7.Globe Control valve
8.Pneumatic Angle Seat Control Valve

For swift delivery and top-notch service, Speciality Valve is your control valve manufacturers in India. We provide valves in following description:
1.Available Materials: Ductile Iron, Cast iron (WCB, WCC, WC6), LCC, LCB, Stainless Steel (SS316, SS304), Super Duplex (F51, F53, F55).
2.Class: 150 to 2500.
3.Nominal Pressure: PN10 to PN450.
4.Medium: Air, Water, Chemical, Steam, Oil.
5.Operations: Electric Actuated and Pneumatic Operated.
6.Size: 1/2”- 24”.
7.Ends: Flanged, butt weld, socket weld, threaded.

Electric Actuator Details:
1.Torque: 3 – 9 nm.
2.Operating pressure: 8 Bar.
3.Port Connection: NPT1.4”.
4.Mounting Base: ISO5211.
5.Temperature: -20°C to +80°C.

Pneumatic Actuator Configuration:
1.4-20 amp.
2.Pneumatic single acting actuators.
3.Pneumatic double acting actuators.
4.Pneumatic rotary actuators.
5.Pneumatic Scotch and Yoke actuators.
6.Pressure: 228 bar.

Temperature Ranges:
1.Standard: -4°F to 200°F (-20°C to 93°C).
2.Low: -40°F to 176°F (-40°C to 80°C).
3.High: 0°F to 300°F (-18°C to 149°C).

By choosing reputable Control Valve Manufacturers in India, you can be assured of high-quality valves that deliver consistent performance